HIGHLIGHTS
- Low profile, portable, dynamic weight process
- Obtain truck weight and vehicle weight quickly
- Reliable scale system & limited maintenance
- Truck weight accurate to 3% GVW, 95% CI
- Slow speed applications only (less than 16 km/hr)
- Exceed ASTM IV guidelines for slow speed WIM
- Windows compatible Weight In Motion Software; automatic vehicle classification; overweight indication; not vista supported
- 1 Year warranty
PORTABLE WEIGHT IN MOTION (WIM)
If it’s a reliable, portable wiegh-in-motion system that you’re looking for, look no further. Using our highly successful Ultraslim Wheel Load Scales, Massload is able to offer a reliable and portable method to acquire and store vehicle weight. Operation of the system is simple and a single person can setup and operate the scale system with ease. Simply lay the weight pads down, lay down the leveling track, connect the weight pads to the computer and you’re up and running!
SYSTEM COMPONENTS
- 2 Ultraslim Wheel Load Scales
- 1 Y-Cable to connect both weight pads to LCIB computer Interface
- 1 LCIB Computer Interface Device
- 1 USB cable to connect LCIB to a computer
- 4 sets of leveling track (5 meter x 1 meter track per set for standard suspension vehicles)
- 1 Weight In Motion (WIM) software package
WEIGHT IN MOTION SOFTWARE
- Static and dynamic weight mode
- Automated vehicle classification with configurable classifications
- Overweight indication based on vehicle classification
- Traffic light support
- Report generation with configurable reports
- Configurable main screen – show only relevant data
- Post weighing screen allows you to fill in additional information
- Program security on settings and user logins to protect weight data
Computer Weigh Station
The portable weigh station includes a portable, self contained case housing a laptop computer, full sized roll printer, and integrated power supply, all fit neatly and snuggly in a waterproof Pelican carrying case. The laptop and printer sit on the top most layer of the case while the wiring and power supply are located underneath. Even deeper in the case is a large storage compartment, ideal for extra paper and other items you may need at your temporary weighing site. There is no easier way to obtain your dynamic weight information!
SPECIFICATIONS
Rated Capacity | Dynamic weight: 20,000 lbs per pad (40,000 lbs per axle weight) Static: 40,000 lbs per pad (80,000 lbs per axle weight) |
Accuracy | Dynamic: accurate to 3% of gross vehicle weight, 95% CI Static: wheel load accurate to 0.5% full scale nominal |
Overload Capacity | 125% full scale safe overload (electronics protected) 150% full scale ultimate overload (metal protected) |
Temperature Range |
-30ºC to 80ºC (operating), -10ºC to 60ºC (compensated based on an additional 0.05% to 0.10% FS static error for every 10ºC deviation from 20ºC) |
Graduation | 50 lb standard |
Weight | 84 lbs / pad (2 pads per system) tracking (73 lb each set) |
Material | High Strength Aluminum (frame and weighing surface) and Stainless Steel (bottom plate) |
Ground Requirements | Fatigue limit and accuracy is significantly affected by the scale foundation. This scale system must be used on cement and pavement only and should be level within 1/8″ per square meter |
Dimensions | Max: 41 5/16″ x 18 1/2″ x 0.9″; weighing surface: 39 3/8″ x 16 1/2″ |
Sealing Standard | IP-66: totally protected from dust; protected from strong jets of water |
Power | Dynamic scale is powered by the LCIB, which is powered from the USB port of the computer (draws < 500mA) |